Digi-Sense Benchtop RTD/Thermocouple/Thermistor Temperature Controllers

Feature direct plug-in of heating devices

Multiple control modes from simple on/off control to sophisticated autotuning PID control

Advanced models include FREE software for remote computer control of all system operations

Program up to nine ramp and soak profiles of up to 16 segments each with the advanced models

Easy to use Plain English menus with two-line display simultaneously show measured value and set point.Temperature scale is selectable to read in °C, °F, K (Kelvin), and °R (Rankine). Nonvolatile EEPROM memory stores set-up and operating parameters—saves parameters even during power loss. Front-panel LEDs indicate output and alarm conditions. Sensor-calibrate function corrects for probe error.

Easy to connect Controller has a convenient output receptacle for direct plug-in of heaters and other devices (IEC on 230 VAC models). All models accept eight thermocouple types (advanced models also accept RTDs and YSI thermistor probes). Thermocouples must be purchased separately. Place unit on a benchtop or mount with optional panel-mount kit.

Specifications Dimensions: 7.3"W x 3.7"H x 10.0"D (185 mm x 94 mm x 254 mm)

Range J range: -310 to 1832°F (-190 to 1000°C)

K range: -328 to 2502°F (-200 to 1372°C)

T range: -328 to 752°F (-200 to 400°C)

E range: -328 to 1832°F (-200 to 1000°C)

N range: -328 to 2372°F (-200 to 1300°C)

B range: 392 to 3272°F (200 to 1800°C)

R range: 32 to 3214°F (0 to 1768°C)

S range: 32 to 3214°F (0 to 1768°C)

Accuracy: Types J, K, T, E, N: ±0.1% reading and ±0.7°F (0.4°C) above –248°F (-100°C); ±0.1% reading and ±1.8°F (1°C) below –248°F (-100°C) Types B, R, S: ±0.1% reading and ±1.8°F (1°C)

Alarm output (advanced): one SPDT relay rated from 230 VAC 2 A max; resistive

Ambient conditions: 32 to 104°F (0 to 40°C); 0 to 90% RH, non-condescending Display: vacuum flourescent two lines 16|character alphanumerics 3/16"H each

Control type: On/Off, Programmable PID, Autotune PID